ClearVis Portable AC Window Vent Kit Installation Instructions
Installation Instructions
Difficulty
Easy
Steps
06
Time Required
0.5 hours
Sections
01
Flags
00
Parts
- 1 ClearVis AC Window Panel
Tools
- Flathead Screwdriver
Please read instructions & notes thoroughly before installation.
Step 1 Loosen Width Adjustment Locks
- Release the automatic width adjustment locks by loosening the screws with a screwdriver. This allows the spring mechanism to move freely from side to side.
Step 2 Test Fit the Panel
- Before applying weatherstripping, test installing the sash into your window track.
- Insert the sash into the window track. Push against the spring mechanism and swing the opposite end into the opposite window track.
- Gently release then tighten the width adjustment locks.
- It is important to test that the sash fits properly before applying the weatherstripping. If it sits properly, you can remove it to put on the foam weatherstripping in step 3.
Step 3 Apply Weatherstripping
- Apply the foam weatherstripping by peeling back the paper and exposing the adhesive.
- Unroll it along the edge of the sash, pressing to ensure it adheres.
- Install on both the top and the bottom. Trim to fit with scissors.
Step 4 Insert Into Track
- Place the sash back into the window, then tighten the width adjustment lock to lock it in place.
Step 5 Prep Panel for AC Unit
- Remove any existing attachments on the end of the air conditioner tube.
Step 6 Attach AC Tube
- Rotate the tube on the outside or inside of the threads to make a seal, you may need to spin clockwise or counterclockwise.