Guide to Replacing Flaps in Johnson and PetSafe Ultimate Pet Doors Using Pride Flaps
Despite the discontinuation of the PetSafe Ultimate and Johnson pet doors, many homeowners continue to cherish these installations, making the need for reliable replacement flaps inevitable.
The good news? Pride Pet Products crafts a flap tailored to seamlessly replace those in both the PetSafe Ultimate and Johnson door models.
A Glimpse Into The Past
Johnson began its legacy as one of the first successful pet door manufacturers in the USA around the 1950s. Eventually, the Johnson pet doors legacy was taken over by PetSafe (under the Radio Systems brand), rebranding the same immaculate design as the PetSafe Ultimate. With time, the production of these iconic doors ceased.
However, the torch was carried on by Pride, whose pet doors closely echoed the Johnson design. In fact, by the early 2000s, many discerned that the Johnson extra-large was nearly identical to the Pride variant, save for the flap material and locking cover.
The only size that will not work is the small, which attaches differently at the top. Some people have been able to modify the small flap to fit their pet doors, but it will not be a simple installation like with the medium, large and extra-large.
What Is The Difference?
The primary divergence between the Pride replacement flap and the Johnson and PetSafe Ultimate is the material. Crafted from robust black rubber, the Pride flaps stand out as sturdier yet weightier and lack transparency.
This change could be a little off-putting for some pets, especially smaller ones accustomed to the lighter PetSafe Ultimate flaps. But more often than not, a pet's eagerness to explore the outdoors overcomes any initial hesitation towards the new flap.
What If My Flap Only Has One Piece?
A frequent point of confusion is that these flaps do not have a "U-shaped gasket." If you notice two screws atop your pet door or gaps that allow uninvited air and pests inside, chances are, your door once had a framing piece surrounding your flap. The Pride Replacement Flap rectifies this by including both pieces, ensuring an airtight seal post-installation.
PLEASE NOTE: PetSafe also made a flap that was similar in appearance that was only one piece. However, the magnets at the bottom of this PetSafe Classic Flap will connect at the bottom of your pet door and there will not be the obvious gap around the border. The Pride Replacement Flap comes with both pieces, so you will not have that gap once you install the Pride replacement flap.
Here are some examples of these flaps when they are missing the gasket piece:
Choosing the Right Size
some flaps have what size they are written on them, in which case, you can simply opt for the indicated size. If not, you only need to measure the width of your flap. Measure the inner flap only, not the U-shaped gasket piece.
The small flaps have nubs that glide into a channel and holds the flap in place without screws. This means that the small flap cannot be installed without modifications.
FAQs about Johnson and PetSafe Ultimate Replacement Flaps:
Can I replace my Johnson pet door model l-2 flap?
The Johnson pet door replaces flap for your model can be replaced with the Pride Large flap. The Pride Flap is made from a durable black rubber material.
Can I replace my pet safe ultimate pride flaps large size "U" shaped gasket only?
No. The flap and gasket are sold together and cannot be purchased separately.
Do you have a Tuffi flap to replace the old one I have?
Tuffi replacement flaps are no longer made.
The Pride Replacement Flap can replace your existing flap for the Medium, Large and Extra Large sizes. If yours is small, we recommend replacing the entire pet door.
Do you have Johnson Ultimate door flap replacement parts?
This pet door has been discontinued, and we do not have any parts. We do sell the Pride Replacement Flap, which can fit this model.
How do I measure for the Pride Replacement Flaps - XLarge to ensure I'm getting the right size?
It is best to measure the width of the interior rectangular-shaped flap and compare it to the chart here.
I have a Johnson L-2. Where can I find Johnson L2 pet door replacement flaps?
The Johnson pet door L-2 model and replacement flaps are no longer being made. You can order the Pride Large Replacement flap to fit the Model L-2 here.
I need a Johnson flap replacement for my Johnson S-2, do you sell one?
The Johnson M-2 replacement flap for Johnson's pet door is no longer available.
The Medium Pride Replacement Flap can replace your existing flap. It is made from a durable black rubber material.
What can I use for a Johnson pet door replacement flap for my Johnson M-2 flap?
The Johnson M-2 replacement flap for Johnson pet door is no longer available. The Medium Pride Replacement Flap can replace your existing flap.
What options do I have to replace my PetSafe Ultimate door flap?
The PetSafe Ultimate pet door replacement flap is no longer made. The Pride Replacement Flap can replace your existing flap for the Medium, Large and Extra Large sizes.
If yours is a Small, recommend replacing the entire pet door.
What size Pride replacement flap should I order for a Johnson S2?
The Johnson pet door replacement door for the Model S-2 is no longer made. The Pride Small replacement flap is not designed to work with the old Johnson frames. We suggest replacing the entire pet door with the small Pride Pet Door.
Where can I buy Johnson l-2 replacement flaps?
The Johnson Replacement Flap for your model can be replaced with the Pride Large flap.
Where can I find a PetSafe Ultimate door flap?
PetSafe Ultimate pet door replacement flaps are no longer being made.
The Pride Replacement Flap can replace your existing flap for the Medium, Large and Extra Large sizes. If yours is small, we recommend replacing the entire pet door.
Where can I find a PetSafe Johnson pet door two part replacement flap Model M?
The Model M-2 for the replacement pet door for Johnson's pet door, which was bought by PetSafe.
Where can I find a replacement flap for Ultimate-Pet-Door?
The PetSafe Ultimate pet door replacement flap is no longer made.
The Pride Replacement Flap can replace your existing flap for the Medium, Large and Extra Large sizes.
Where can I find a XXLarge pet door replacement flap?
That is the Ideal Original and Deluxe Replacement Flap. You will select the Super Large Size which is 15" w x 20" h.
Where can I find Johnson XL4 pet door replacement flaps?
The Johnson XL-4 replacement flaps are no longer made. You can order the Pride Extra Large Replacement flap to fit here.
I need to replace my Johnson pet door model M-2 flaps. What do you recommend?
Johnson pet door replacement flaps for the M2 are no longer being made.
The Pride Replacement Flaps work as replacement flaps for the Medium, Large, and Extra Large Model. The small flap will work but will require some minor modifications.
|
Example Here is an old PetSafe Ultimate xl doggie door frame with an Extra Large Pride Replacement flap installed. As you can see, the holes at the top actually line up perfectly, and the 2-piece design functions the way it is supposed to! To purchase a Pride Replacement flap, please CLICK HERE.   
|