The Ideal Fast Fit Patio Pet Door Insertis a 'spring load' panel which requires no tools for installation (except for the included pin lock). Flaps are relatively light weight, clear flexible vinyl. Locking covers are plastic. Use a broomstick in the track to avoid having to drill a hole for the pin lock.Glass is 1/8" clear tempered. Don't look for the old "large" size; it's been discontinued by Ideal. This pet door has lighter weight metal and glass and has a more limited adjustment range than the Quick Panel III but is less expensive. Be sure to carefully check your track height compared with 'Adjustment Range' to be sure of a fit. There are quite a few details that might be important for you to think about in purchasing any panel pet door. Begin with 'Key Points' to get a quick overview of the most important issues. Then study the 'Comparison Chart' and read the information on the Patio Panel FAQ page which cover the fine points of patio pet doors. Frame thickness is 5/8". Draft Stopper is included. Hot Tip: Most, but not all, Ideal Patio Panels include a plastic frame immediately around the flap. On occasion these frames break. Don't buy a whole new patio pet door! We carry the replacement flap assembly (see below). But, If you happen to have metal framing immediately surrounding the flap, you'll probably only need a replacement flap. Be sure to get the 'Deluxe' version in that case. Discrepancy in panel widths: Ideal "Fast Fit" panel pet doors are manufactured in Thailand today. However, for many years they were manufactured in the USA. As shown below, the two versions have different over-all widths even though flap dimensions are the same. Ground shipping only on all Ideal panel pet doors. |
|


.gif)
.jpg)