|
Hale Pet Doors for Walls (formerly Hale Security Pet Doors for
Walls) include very heavy extruded aluminum
framing. The tunnel is aluminum sheet and includes carpet and
adhesive to finish tunnel. Flaps are fully weather-stripped and use adjustable magnets to ensure a good seal.
The double flap version is particularly effective against wind and provides
improved insulation.
Most of our Hale sales are for the double flap version for this
reason.
We think the single flap version should be limited
to unheated garages or other areas where the high performance of the
double flap style is not required. The single-flap versions place the flap on the outside frame to help reduce weather coming in.
The locking cover is 3/16"
Lexan (polycarbonate) with a steel dead-bolt to hold it in place. The locking cover normally installs straight down from above. If something is in the way (a
window sill for example) you may order a 'side load option' at no extra charge
(see 'Hale
Other Parts').
A particularly useful feature of all Hale
pet doors is that the magnets may be easily removed using a
flat-bladed screwdriver. This makes training of skittish pets much
easier as the flaps are then extremely easy to push. The magnets may
be gradually re-introduced as the pets become confident in using the
door.
All Hale pet doors come standard with "polar"
flaps--a vinyl that is more flexible in cold weather than "regular"
vinyl. Replacement flaps may be ordered here
Hale Pet
Door Replacement Flaps and Locking Covers.
Very flexible 'training' flaps may be ordered for
pets who are initially resistant to pushing through the regular
flaps.
These may be ordered at "Hale
Replacement Flaps". The locking cover
on a Hale Pet Door (formerly Hale Security Pet Door) wall mount pet door is 3/16"
Lexan (polycarbonate) with a steel dead-bolt to hold it in place. The locking cover installs from above so clearance is required. However, you can special-order a 'side-load' locking cover if needed by selecting the option above right. No extra charge. A second possibility is to shim the inside frame inward toward the interior of the house until the locking cover clears the overhead obstruction.
Self-framing adjustment range is 21/2"-10". A special version adjustable 21/2" to 16" is available if needed which can be ordered at extra cost by selecting
the replacement flaps section below.
The side-load option, extended tunnel option and
additional pin-lock for added security may be ordered
from the "Hale
Other Parts" page after ordering your pet door.
Choosing a flap size: Here are the
Hale recommendations. However, we suggest you do your own
measuring as suggested on our "Measure
Your Pet" page prior to making a decision.
Ground Delivery Only. International
customers are responsible for any customs fees, duties and taxes. |

Hale Pet Door
Self-Framing Wall Mount

Hale Pet Door Available Colors
Satin, Arizona Beige, White, Bronze

Three Sizes (out of 11) of the
Hale
Wall Mount
Pet Door
.jpg)
Hale Wall Mounts Come Standard
with a "Rain Cap"
.jpg)
|