Hale Pet Door Standard Panel For Sliding Glass Doors

The Hale "Standard" Patio Pet Door for Sliding Glass Doors

Hale is Patterned after Pet-Eze Deluxe 81

The first really high quality patio panel pet door on the market was released by the Pet Eze company in the 1970's. This door, eventually called the 'Deluxe 81', required tools including a hacksaw for installation. But it was a beautiful product. Hale Pet Doors (formerly Hale Security Pet Doors) has essentially copied the Deluxe 81 in many respects but added their own flap assembly and locking cover in creating their Standard Patio Pet Door.

Installation (see detailed instruction sheet below)

Installation requires cutting the top of the panel and an 'adaptor channel' with a hacksaw. Then the panel is fastened into the track with sheet metal screws. This 'semi-permanent' installation is required because the built-in locking mechanism mates to the 'adaptor channel' that mounts to the edge of the pet door with sheet metal screws. This 'adaptor channel', which also must be shortened with a hacksaw to fit, performs two functions. First, it provides something for the lock to mate to. Second, it provides a very good, air-tight seal down the full length of the sliding glass door.

Great Locking Cover

Hale has added a Lexan ('polycarbonate') locking cover in a 'J' shaped slot for increased security. There is a spring-loaded steel dead-bolt to lock the cover in place.

High Performance Flap Assembly

Most exciting, Hale has included a double flap for improved insulation value(single flap version is available though not recommended by the manufacturer). This flap assembly consists of two flaps, both fully weather stripped as in the other Hale pet doors, and both with magnets to stand up against wind. The dead air-space between the two flaps provides for better insulation than a single flap alone.

We need two bits of information from you to order this Hale patio panel:

This information is requested by the shopping cart:

Carefully measure your track height. Hale will build the panel to any height (that's why it takes so long) but they need a correct measurement to begin with.
Also, be sure you've indicated which direction your sliding door closes when on the inside looking out. Hale will mount the panel lock for you and it is not reversible.

Return Policy:

Because these pet doors are built custom to your specification, returns will be allowed a 50% credit toward the purchase of a different Hale Pet Door. The Patio Pacific normal return policy applies in respect to time limits only.

There are quite a few details that might be important for you to think about in purchasing any panel pet door:

Begin with 'Key Points' to get a quick overview of the most important issues.
Then study the 'Comparison Chart' and read the information on the Patio Panel FAQ page which cover the fine points of patio pet doors.
All Hale pet doors come standard with "polar" flaps--a vinyl that is more flexible in cold weather than "regular" vinyl. Replacement flaps may be ordered here Hale Pet Door Replacement Flaps and Locking Covers.
Very flexible 'training' flaps may be ordered for pets who are initially resistant to pushing through the regular flaps.
Important: Hale 'Standard' panels are not recommended for Anderson or Pella brand sliding glass doors. Use a Hale 'Omni' panel instead.

Shipping:

Allow about 15 days for shipping from the factory plus 1-5 days transit time to you (Ground Delivery Only).

Choosing a flap size:
Here are the Hale recommendations. However, we suggest you do your own measuring as suggested on our "Measure Your Pet" page prior to making a decision.

Features -

Available in 11 sizes to fit a broad range of pets
Dual pane tempered glass
Dual flap assembly for improved insulation
Built in 'adaptor channel' mounts on edge of sliding glass door with screws
Tough, Lexan locking cover for security
Can be any height to a maximum of 96"<
Frame thickness is⁷/₈"

Hale Panel Pet Door
"Standard" and "Omni"

Hale Security Patio Pet Door Showing Locking Cover

Close Up Shows the Hale Locking Cover

Hale Standard Patio Pet Door Selection Table

tock Number	Size	Flap Dimension²	Rise¹	Price	Buy
01HS01	Small	5¹/₂" x 7¹/₂ "	1"	$635
01HS02	Small/Medium	6 ¹/₂" x 9¹/₂"	1"	$685
01HS03	Medium	8¹/₂" x 12¹/₂"	1"	$750
01HS04	Tall/Medium	8¹/₂" x 16"	1"	$770
01HS04T			5"
01HS05	Large	11" x 16"	1"	$835
01HS05T			5"
01HS06	Tall/Large	11" x 19¹/₂"	1"	$850
01HS06T			5"
01HS07	Tall/Large Plus	11" x 23¹/₂"	1"	$880
01HS07T			5"
O1HS08	X Tall Large	11" x 27¹/₂"	1"	$930
O1HS08T			5"
01HS09	X Large	14" x 19¹/₂"	1"	$905
01HS09T			5"
01HS10	X Large Plus	14" x 23¹/₂"	1"	$945
01HS10T			5"
01HS11	Giant	15¹/₂" x 27¹/₂"	1"	$1000
01HS11T			5"
Frame Color: S-Satin (aluminum) B-Bronze (dark brown) W-White			No Charge	Frame color and height options are presented after you 'Buy Now'
Adjustment Range: P - up to 82"			No Charge
R - Over 82" to 96" (sizes taller than 96" are not available)			Additional Cost
Important Note: Please specify whether your sliding glass door 'Closes to left' or 'Closes to right' when on the inside looking out. (A space is offered for this input after you 'Buy Now').
Installation Warranty		Hale Replacement Flaps and Locking Covers
¹ 'Rise' is the height of the flap above the base of the pet door. We suggest that 'flap height' + 'rise' should about equal pet shoulder height. These dimensions are approximate within ¹/₂". ² The overall width is equal to flap width plus 4".

Hale Standard Patio Pet Door

Installation Type

Special Pet Needs

Special Installations

Comparison Charts

Parts for Pet Doors

Great Deals

Major Mfr Pages

Pet Door Problems