Heavy Duty
Dog Door® / Big Dog
Door™
|
||
Customer Service | 8am-4:30pm Pacific | (800) 826-2871
Please have stock number and credit card ready
|
Low Price Guarantee |
Shipping Time |
Measure Your Pet! |
Train Your Pet |
View Cart |
Email Page |
Heavy Duty
Dog Door® / Big Dog
Door™
|
||
|
The Heavy Duty Dog Door® and Big Dog Door™ are installed
on the outside surface of a building, wall or door, etc.
|
|
|
|
Step #1: Measure the belly height of your pet from ground level to his underside to find the correct height of the door opening. Bottom edge is usually 6" to 12". Do not mount flush to ground. For the Heavy Duty Dog Door™ cut the opening 12-1/2" wide x 17-1/2" high. For the Big Dog Door™ cut the opening 16-1/2" wide x 25-1/2" high. Step #2: Step #3: Step #4: Do not let the dog have a bad
experience or it may become frightened. Installation Tips: Install 1/8" felt or rubber weather stripping on surface of building or door. Do not put rubber weather stripping on Gun Dog House Door®. NOTE: If your door does not close at the bottom, the door is installed incorrectly. Unscrew door and move 1/4" lower. If there is a gap between top strap and upper doorframe, move door 1/4" higher.
|
|
|
|
Closing
panel is installed on the inside of
building or door.
|
|
Step 1 Place panel against wall as a template. Install each channel so the panel slides in its grooved track. Step 2 Step 3 |
|
![]()
|
Customer Service 8am-4:30pm Pacific (800) 826-2871 Please have stock number and credit card ready sales@petdoors.com |
Patio Pacific Inc 202-F1 Tank Farm Rd San Luis Obispo, CA 93401-7168 Support: support@petdoors.com |
We're A+! |
Every effort has been made to ensure accuracy of measurements given on this web site. However, they are not guaranteed.
© 2010 Patio Pacific, Inc